vsat installation

Tools for VSAT Installation

Posted on |

Tools for VSAT Installation 

Following tools are required for general VSAT installation and to the alignment of VSAT antenna.

Tools for Radio

  • Adapter WR-137 & 229 to coax (calibrated insertion loss @ 6 GHz for C band or 14 GHz for Ku band).
  • An assortment of cables, connectors, and adapters (calibrated @ 6 GHz for C band or 14 GHz for Ku band).

Common Tools

  • Spectrum Analyzer
  • DMM Meter
  • 30dB attenuator
  • 3dB attenuators 02 Nos, 5dB attenuator 01 No, 10dB attenuator 01 No,  and 20dB attenuators 01 No.
  • Inclinometer
  • Magnetic Compass
  • Personal Computer (with terminal emulation program such as ProComm, HyperTerminal)
  • Bag of Cable tie-wraps
  • Plier
  • Grounding Strap
  • Screw Driver Set
  • IF 70Mhz Cables 03 Nos.
  • BNC to N-type Adapter
  • Large Crescent Wrench
  • Spanners Set
  • RJ-45 Connector ended cable
  • RJ-45 Adapter
  • One Roll Mastic Tape
  • Cable Cutter
  • One VCU OPX card (recommended for testing of voice where only E&M connectivity ).
  • Soldering Iron
  • Solder Flux
  • De-soldering Pump
  • Soldering Alloy
  • Level Bottle
  • Measuring Tape
  • Plumb bob
 

VSAT Installation and other Books you may interested

[amazon_link asins=’B06WVFD4NS,5901128257,091789331X,0750634758,0672224968,B01DJDHQCY,091789314X’ template=’ProductCarousel’ store=’elkay0c-20′ marketplace=’US’ link_id=”]
 
Books on Antenna  Books on Antenna  Books on Antenna 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.