Tools for VSAT Installation
Posted on |
Following tools are required for general VSAT installation and to the alignment of VSAT antenna.
Tools for Radio
- Adapter WR-137 & 229 to coax (calibrated insertion loss @ 6 GHz for C band or 14 GHz for Ku band).
- An assortment of cables, connectors, and adapters (calibrated @ 6 GHz for C band or 14 GHz for Ku band).
Common Tools
- Spectrum Analyzer
- DMM Meter
- 30dB attenuator
- 3dB attenuators 02 Nos, 5dB attenuator 01 No, 10dB attenuator 01 No, and 20dB attenuators 01 No.
- Inclinometer
- Magnetic Compass
- Personal Computer (with terminal emulation program such as ProComm, HyperTerminal)
- Bag of Cable tie-wraps
- Plier
- Grounding Strap
- Screw Driver Set
- IF 70Mhz Cables 03 Nos.
- BNC to N-type Adapter
- Large Crescent Wrench
- Spanners Set
- RJ-45 Connector ended cable
- RJ-45 Adapter
- One Roll Mastic Tape
- Cable Cutter
- One VCU OPX card (recommended for testing of voice where only E&M connectivity ).
- Soldering Iron
- Solder Flux
- De-soldering Pump
- Soldering Alloy
- Level Bottle
- Measuring Tape
- Plumb bob
VSAT Installation and other Books you may interested
[amazon_link asins=’B06WVFD4NS,5901128257,091789331X,0750634758,0672224968,B01DJDHQCY,091789314X’ template=’ProductCarousel’ store=’elkay0c-20′ marketplace=’US’ link_id=”]
 |  |  |
