ITU-T Recommendations : Series Q – Switching and signalling
TAGS: ITU-T Recommendations Series Q

ITU-T Recommendations: Series Q

(Switching and signaling)

ITU-T Recommendations In force – December 2000 edition
 
ITU-T Rec. Q.1 (11/88) Signal receivers for manual working
ITU-T Rec. Q.2 (11/88) Signal receivers for automatic and semi-automatic working, used for manual working
ITU-T Rec. Q.4 (11/88) Automatic switching functions for use in national networks
ITU-T Rec. Q.5 (11/88) Advantages of semi-automatic service in the international telephone service
ITU-T Rec. Q.6 (11/88) Advantages of international automatic working
ITU-T Rec. Q.7 (11/88) Signalling systems to be used for international automatic and semi-automatic telephone working
ITU-T Rec. Q.8 (11/88) Signalling systems to be used for international manual and automatic working on analogue leased circuits
ITU-T Rec. Q.9 (11/88) Vocabulary of switching and signalling terms
ITU-T Rec. Q. 11 ter – Timetable for coordinated implementation of the full capability of the numbering plan for the ISDN era (Recommendation E.164)
ITU-T Rec. Q.12 (11/88) Overflow – alternative routing – rerouting – automatic repeat attempt
ITU-T Rec. Q.14 (11/88) Means to control the number of satellite links in an international telephone connection
ITU-T Rec. Q.20 (11/88) Comparative advantages of “in-band” and “out-band” systems
ITU-T Rec. Q.21 (11/88) Systems recommended for out-band signalling
ITU-T Rec. Q.22 (11/88) Frequencies to be used for in-band signalling.
ITU-T Rec. Q.23 (11/88) Technical features of push-button telephone sets
ITU-T Rec. Q.24 (11/88) Multifrequency push-button signal reception
ITU-T Rec. Q.25 (11/88) Splitting arrangements and signal recognition times in “in-band” signalling systems
ITU-T Rec. Q.26 (11/88) Direct access to the international network from the national network
ITU-T Rec. Q.27 (11/88) Transmission of the answer signal
ITU-T Rec. Q.28 (11/88) Determination of the moment of the called subscriber’s answer in the automatic service
ITU-T Rec. Q.29 (11/88) Causes of noise and ways of reducing noise in telephone exchanges
ITU-T Rec. Q.30 (11/88) Improving the reliability of contacts in speech circuits
ITU-T Rec. Q.31 (11/88) Noise in a national 4-wire automatic exchange
ITU-T Rec. Q.32 (11/88) Reduction of the risk of instability by switching means
ITU-T Rec. Q.33 (11/88) Protection against the effects of faulty transmission on groups of circuits
ITU-T Rec. Q.35/E.180 (03/98) Technical characteristics of tones for the telephone service
ITU-T Rec. Q.44 (11/88) Attenuation distortion
ITU-T Rec. Q.45 bis (11/88) Transmission characteristics of an analogue international exchange
ITU-T Rec. Q.45 (10/84) Transmission characteristics of an analogue international exchange.ITU-T Rec. Q.48 (11/88) Demand assignment signalling systems
ITU-T Rec. Q.50 (06/97) Signalling between circuit multiplication equipments (CME) and international switching centres (ISC)
ITU-T Rec. Q.55 (12/99) To be published
ITU-T Rec. Q.65 (06/00) – To be published
ITU-T Rec. Q.68 (03/93) Overview of methodology for developing management services
ITU-T Rec. Q.71 (03/93) ISDN circuit mode switched bearer services
ITU-T Rec. Q.72 (03/93) Stage 2 description for packet mode services
ITU-T Rec. Q.76 (02/95) Service procedures for Universal Personal Telecommunication – Functional modelling and information flows
ITU-T Rec. Q.80 (11/88) Introduction to stage 2 service descriptions for supplementary services
ITU-T Rec. Q.81.1 (11/88) Stage 2 description for number identification supplementary services: Direct dialling-in
CCITT Rec. Q.81.2 (02/92) Stage description for number identification supplementary services
ITU-T Rec. Q.81.3 (09/91) Calling line identification presentation (CLIP) and calling line identification restriction (CLIR)
ITU-T Rec. Q.81.7 (06/97) Malicious call identification (MCID)
ITU-T Rec. Q.82.1 (11/88) Call transfer.
ITU-T Rec. Q.82.2 (03/93) Stage 2 description for call offering supplementary services; Clause 2 – Call forwarding; Clause 3 – Call deflection
ITU-T Rec. Q.82.4 (11/88) Stage 2 description for call offering supplementary services: Line hunting
ITU-T Rec. Q.82.7 (07/96) Stage 2 description for call offering supplementary services: Explicit call transfer
ITU-T Rec. Q.83.1 (09/91) Stage 2 description for call completion supplementary services: Call waiting (CW) – (Modifications and addenda to: Recommendation Q.83)
ITU-T Rec. Q.83.2 (02/92) Stage 2 description for call completion supplementary services (Modifications to: Recommendation Q.83) – Section 2 – Call hold
ITU-T Rec. Q.83.3 (11/88) Completion of call to busy subscriber
ITU-T Rec. Q.83.4 (09/91) Stage 2 description for call completion supplementary services: Call waiting (CW) – (Modifications and addenda to: Recommendation Q.83)
ITU-T Rec. Q.84.1 (03/93) Stage 2 description for multiparty supplementary services: Conference calling (CONF)
ITU-T Rec. Q.84.2 (10/95) Stage 2 description for multiparty supplementary services – Clause 2 –
Three-party service
ITU-T Rec. Q.85.1 (02/92) Stage 2 description for community of interest supplementary services (Modifications and addenda to Rec. Q.85) – Section 1 – Closed User Group; Section 3 – Multi-level Precedence and Preemption
ITU-T Rec. Q.85.6 (02/95) Stage 2 description for community of interest supplementary services – Global Virtual Network Service (GVNS).
ITU-T Rec. Q.85.6 Annex A (07/96) Stage 2 description for community of interest supplementary services: Global Virtual Network Service (GVNS) – Annex A: Service procedures and information flows based on Intelligent Network CS-1 capabilities
ITU-T Rec. Q.86.1 (11/88) Credit card call
ITU-T Rec. Q.86.2 (10/95) Stage 2 description for charging supplementary services – Advice of charge
ITU-T Rec. Q.86.3 (03/93) Stage 2 description for charging supplementary services – Reverse charging (Rev)
ITU-T Rec. Q.86.4 (06/97) Stage 2 description for charging supplementary services: International Freephone Service (IFS)
ITU-T Rec. Q.86.7 (10/95) Stage 2 description for charging supplementary services: Clause 7 – International Telecommunication Charge Card (ITCC)
ITU-T Rec. Q.87.1 (03/93) Stage 2 description for additional information transfer supplementary services: Clause 1 – User-to-user signalling (UUS)
ITU-T Rec. Q.87.2 (11/88) User signalling bearer services
ITU-T Rec. Q.101 (11/88) Facilities provided in international semi-automatic working
ITU-T Rec. Q.102 (11/88) Facilities provided in international automatic working
ITU-T Rec. Q.103 (11/88) Numbering used
ITU-T Rec. Q.104 (11/88) Language digit or discriminating digit
ITU-T Rec. Q.105 (11/88) National (significant) number
ITU-T Rec. Q.106 (11/88) The sending-finished signal.
ITU-T Rec. Q.107 bis (03/93) Analysis of forward address information for routing
ITU-T Rec. Q.107 (11/88) Standard sending sequence of forward address information
ITU-T Rec. Q.108 (11/88) One-way or both-way operation of international circuits
ITU-T Rec. Q.109 (11/88) Transmission of the answer signal in international exchanges
ITU-T Rec. Q.110 (11/88) General aspects of the utilization of standardized CCITT Signalling Systems on PCM links
ITU-T Rec. Q.112 (11/88) Signal levels and signal receiver sensitivity
ITU-T Rec. Q.113 (11/88) Connection of signal receivers in the circuit
ITU-T Rec. Q.114 (11/88) Typical transmission requirements for signal senders and receivers
ITU-T Rec. Q.115 (12/99) To be published
ITU-T Rec. Q.116 (11/88) Indication given to the outgoing operator or calling subscriber in case of an abnormal condition
ITU-T Rec. Q.117 (11/88) Alarms for technical staff and arrangements in case of faults
ITU-T Rec. Q.118 bis (11/88) Indication of congestion conditions at transit exchanges
ITU-T Rec. Q.118 (09/97) Abnormal conditions – Special release arrangements
ITU-T Rec. Q.120 (11/88) Definition and function of signals
ITU-T Rec. Q.121 (11/88) Signal code.
ITU-T Rec. Q.122 (11/88) Signal sender
ITU-T Rec. Q.123 (11/88) Signal receiver
ITU-T Rec. Q.124 (11/88) Splitting arrangements
ITU-T Rec. Q.125 (11/88) Speed of switching in international exchanges
ITU-T Rec. Q.126 (11/88) Analysis and transfer of digital information
ITU-T Rec. Q.127 (11/88) Release of registers
ITU-T Rec. Q.128 (11/88) Switching to the speech position
ITU-T Rec. Q.129 (11/88) Maximum duration of a blocking signal
ITU-T Rec. Q.130 (11/88) Special arrangements in case of failures in the sequence of signals
ITU-T Rec. Q.131 (11/88) Abnormal release conditions of the outgoing register causing release of the international circuit
ITU-T Rec. Q.133 (11/88) Numbering for access to automatic measuring and testing devices
ITU-T Rec. Q.134 (11/88) Routine testing of equipment (local maintenance)
ITU-T Rec. Q.135 (11/88) Principles of rapid transmission testing equipment
ITU-T Rec. Q.136 (11/88) Loop transmission measurements
ITU-T Rec. Q.137 (11/88) Automatic testing equipment.
ITU-T Rec. Q.138 (11/88) Instruments for checking equipment and measuring signals
ITU-T Rec. Q.139 (11/88) Manual testing
ITU-T Rec. Q.140 (11/88) Definition and function of signals
ITU-T Rec. Q.141 (03/93) Signal code for line signalling
ITU-T Rec. Q.142 (11/88) Double seizing with both-way operation
ITU-T Rec. Q.143 (11/88) Line signal sender
ITU-T Rec. Q.144 (03/93) Line signal receiver
ITU-T Rec. Q.145 (11/88) Splitting arrangements
ITU-T Rec. Q.146 (11/88) Speed of switching in international exchanges
ITU-T Rec. Q.151 (11/88) Signal code for register signalling
ITU-T Rec. Q.152 (11/88) End-of-pulsing conditions – Register arrangements concerning ST (end-of-pulsing) signal
ITU-T Rec. Q.153 (11/88) Multifrequency signal sender
ITU-T Rec. Q.154 (11/88) Multifrequency signal receiver
ITU-T Rec. Q.155 (11/88) Analysis of digital information for routing
ITU-T Rec. Q.156 (11/88) Release of international registers.
ITU-T Rec. Q.157 (11/88) Switching to the speech position
ITU-T Rec. Q.161 (11/88) General arrangements for manual testing
ITU-T Rec. Q.162 (11/88) Routine testing of equipment (local maintenance)
ITU-T Rec. Q.163 (11/88) Manual testing
ITU-T Rec. Q.164 (11/88) Testing equipment for checking equipment and signals
ITU-T Rec. Q.180 (11/88) Interworking of systems No. 4 and No. 5
ITU-T Rec. Q.251 (11/88) General
ITU-T Rec. Q.252 (11/88) Signal transfer time definitions
ITU-T Rec. Q.253 (11/88) Association between signalling and speech networks
ITU-T Rec. Q.254 (11/88) Telephone signals
ITU-T Rec. Q.255 (11/88) Signalling-system-control signals
ITU-T Rec. Q.256 (11/88) Management signal
ITU-T Rec. Q.257 (11/88) General
ITU-T Rec. Q.258 (11/88) Telephone signals
ITU-T Rec. Q.259 (11/88) Signalling-system-control signals
ITU-T Rec. Q.260 (11/88) Management signals.
ITU-T Rec. Q.261 (11/88) Normal call set-up
ITU-T Rec. Q.262 (11/88) Analysis of digital information for routing
ITU-T Rec. Q.263 (11/88) Double seizing with both-way operation
ITU-T Rec. Q.264 (11/88) Potential for automatic repeat attempt and re-routing
ITU-T Rec. Q.265 (11/88) Speed of switching and signal transfer in international exchanges
ITU-T Rec. Q.266 (11/88) Blocking and unblocking sequences and control of quasi-associated signalling
ITU-T Rec. Q.267 (11/88) Unreasonable and superfluous messages
ITU-T Rec. Q.268 (11/88) Release of international connections and associated equipment
ITU-T Rec. Q.271 (11/88) General
ITU-T Rec. Q.272 (11/88) Requirements for the signalling data link
ITU-T Rec. Q.273 (11/88) Data transmission rate
ITU-T Rec. Q.274 (11/88) Transmission methods – Modem and interface requirements
ITU-T Rec. Q.275 (11/88) Data channel failure detection
ITU-T Rec. Q.276 (11/88) Service dependability
ITU-T Rec. Q.277 (11/88) Error control
ITU-T Rec. Q.278 (11/88) Synchronization.
ITU-T Rec. Q.279 (11/88) Drift compensation
ITU-T Rec. Q.285 (11/88) Signal priority categories
ITU-T Rec. Q.286 (11/88) Signalling channel loading and queueing delays
ITU-T Rec. Q.287 (11/88) Signal transfer time requirements
ITU-T Rec. Q.291 (11/88) General
ITU-T Rec. Q.292 (11/88) Reserve facilities provided
ITU-T Rec. Q.293 (11/88) Intervals at which security measures are to be invoked
ITU-T Rec. Q.295 (11/88) Overall tests of Signalling System No. 6
ITU-T Rec. Q.296 (11/88) Monitoring and maintenance of the common signalling channel
ITU-T Rec. Q.297 (11/88) Network management
ITU-T Rec. Q.300 (11/88) Interworking between CCITT Signalling System No. 6 and national common channel signalling systems
ITU-T Rec. Q.310 (11/88) Definition and function of signals
ITU-T Rec. Q.311 (11/88) 2600 Hz line signalling
ITU-T Rec. Q.312 (11/88) 2600 Hz line signal sender (transmitter)
ITU-T Rec. Q.313 (11/88) 2600 Hz line signal receiving equipment.
ITU-T Rec. Q.314 (11/88) PCM line signalling
ITU-T Rec. Q.315 (11/88) PCM line signal sender (transmitter)
ITU-T Rec. Q.316 (11/88) PCM line signal receiver
ITU-T Rec. Q.317 (11/88) Further specification clauses relative to line signalling
ITU-T Rec. Q.318 (11/88) Double seizing with both-way operation
ITU-T Rec. Q.319 (11/88) Speed of switching in international exchanges
ITU-T Rec. Q.320 (11/88) Signal code for register signalling
ITU-T Rec. Q.321 (11/88) End-of-pulsing conditions – Register arrangements concerning ST signal
ITU-T Rec. Q.322 (11/88) Multifrequency signal sender
ITU-T Rec. Q.323 (11/88) Multifrequency signal receiving equipment
ITU-T Rec. Q.324 (11/88) Analysis of address information for routing
ITU-T Rec. Q.325 (11/88) Release of registers
ITU-T Rec. Q.326 (11/88) Switching to the speech position
ITU-T Rec. Q.327 (11/88) General arrangements
ITU-T Rec. Q.328 (11/88) Routine testing of equipment (local maintenance)
ITU-T Rec. Q.329 (11/88) Manual testing.
ITU-T Rec. Q.330 (11/88) Automatic transmission and signalling testing
ITU-T Rec. Q.331 (11/88) Test equipment for checking equipment and signals
ITU-T Rec. Q.332 (11/88) Interworking
ITU-T Rec. Q.400 (11/88) Forward line signals
ITU-T Rec. Q.411 (11/88) Line signalling code
ITU-T Rec. Q.412 (11/88) Clauses for exchange line signalling equipment
ITU-T Rec. Q.414 (11/88) Signal sender
ITU-T Rec. Q.415 (11/88) Signal receiver
ITU-T Rec. Q.416 (11/88) Interruption control
ITU-T Rec. Q.421 (11/88) Digital line signalling code
ITU-T Rec. Q.422 (11/88) Clauses for exchange line signalling equipment
ITU-T Rec. Q.424 (11/88) Protection against the effects of faulty transmission
ITU-T Rec. Q.430 (11/88) Conversion between analogue and digital versions of system R2 line signalling
ITU-T Rec. Q.440 (11/88) General
ITU-T Rec. Q.441 (11/88) Signalling code.
ITU-T Rec. Q.442 (11/88) Pulse transmission of backward signals A-3, A-4, A-6 or A-15. Multifrequency signalling equipment
ITU-T Rec. Q.44 Annex A (11/88) Annexes A, B and C to ITU-T Recommendations Q.440 to Q.458
ITU-T Rec. Q.450 (11/88) General
ITU-T Rec. Q.451 (11/88) Definitions
ITU-T Rec. Q.452 (11/88) Requirements relating to transmission conditions
ITU-T Rec. Q.454 (11/88) The sending part of the multifrequency signalling equipment
ITU-T Rec. Q.455 (11/88) The receiving part of the multifrequency equipment
ITU-T Rec. Q.457 (11/88) Range of interregister signalling
ITU-T Rec. Q.458 (11/88) Reliability of interregister signalling
ITU-T Rec. Q.460 (11/88) Normal call set-up procedures for international working
ITU-T Rec. Q.462 (11/88) Signalling between the outgoing international R2 register and an incoming R2 register in an international exchange
ITU-T Rec. Q.463 (11/88) Signalling between the outgoing international R2 register and an incoming R2 register in a national exchange in the destination country
ITU-T Rec. Q.464 (11/88) Signalling between the outgoing international R2 register and the last incoming R2 register
ITU-T Rec. Q.465 (11/88) Particular cases.
ITU-T Rec. Q.466 (11/88) Supervision and release of the call
ITU-T Rec. Q.468 (11/88) Routing and numbering for international working – Termination of interregister signalling
ITU-T Rec. Q.470 (11/88) At an incoming R2 register situated in a transit exchange
ITU-T Rec. Q.471 (11/88) At the last incoming R2 register situated in the exchange to which the called subscriber is connected
ITU-T Rec. Q.472 (11/88) At the last incoming R2 register situated in a transit exchange
ITU-T Rec. Q.473 (11/88) Use of end-of-pulsing signal I-15 in international working
ITU-T Rec. Q.474 (11/88) Use of Group B signals
ITU-T Rec. Q.475 (11/88) Normal release of outgoing and incoming R2 registers
ITU-T Rec. Q.476 (11/88) Abnormal release of outgoing and incoming R2 registers
ITU-T Rec. Q.478 (11/88) Relay and regeneration of R2 interregister signals by an outgoing R2 register in a transit exchange
ITU-T Rec. Q.479 (11/88) Echo-suppressor control – Signalling requirements
ITU-T Rec. Q.480 (11/88) Miscellaneous procedures
ITU-T Rec. Q.490 (11/88) Testing and maintenance
ITU-T Annex A to Rec. Q.400-Q.490 (11/88) Specifications of Signalling System R2 – Provision of a forward-transfer signalling facility.
ITU-T Rec. Q.500 (11/88) Digital local, combined, transit and international exchanges, introduction and field of application
ITU-T Rec. Q.511 (11/88) Exchange interfaces towards other exchanges
ITU-T Rec. Q.512 (02/95) Digital exchange interfaces for subscriber access
ITU-T Rec. Q.513 (03/93) Digital exchange interfaces for operations, administration and maintenance
ITU-T Rec. Q.521 (03/93) Digital exchange functions
ITU-T Rec. Q.522 (11/88) Digital exchange connections, signalling and ancillary functions
ITU-T Rec. Q.541 (03/93) Digital exchange design objectives – General
ITU-T Rec. Q.542 (03/93) Digital exchange design objectives – Operations and maintenance
ITU-T Rec. Q.543 (03/93) Digital exchange performance design objectives
ITU-T Rec. Q.544 (11/88) Digital exchange measurements
ITU-T Rec. Q.551 (11/96) Transmission characteristics of digital exchanges
ITU-T Rec. Q.552 (11/96) Transmission characteristics at 2-wire analogue interfaces of digital exchanges
ITU-T Rec. Q.553 (11/96) Transmission characteristics at 4-wire analogue interfaces of digital exchanges
ITU-T Rec. Q.554 (11/96) Transmission characteristics at digital interfaces of digital exchanges
ITU-T Rec. Q.601 (03/93) Interworking of signalling systems – General.
ITU-T Rec. Q.602 (03/93) Interworking of signalling systems – Introduction
ITU-T Rec. Q.603 (11/88) Interworking of signalling systems – Events
ITU-T Rec. Q.604 (03/93) Interworking of signalling systems – Information analysis tables
ITU-T Rec. Q.605 (11/88) Interworking of signalling systems – Drawing conventions
ITU-T Rec. Q.606 (11/88) Interworking of signalling systems – Logic procedures
ITU-T Rec. Q.607 (11/88) Interworking of signalling systems – Interworking requirements for new signalling systems
ITU-T Rec. Q.608 (11/88) Interworking of signalling systems – Miscellaneous interworking aspects
ITU-T Rec. Q.611 (11/88) Logic procedures for incoming Signalling System No. 4
ITU-T Rec. Q.612 (11/88) Logic procedures for incoming Signalling System No. 5
ITU-T Rec. Q.613 (11/88) Logic procedures for incoming Signalling System No. 6
ITU-T Rec. Q.614 (03/93) Logic procedures for incoming Signalling System No. 7 (TUP)
ITU-T Rec. Q.615 (11/88) Logic procedures for incoming Signalling System R1
ITU-T Rec. Q.616 (11/88) Logic procedures for incoming Signalling System R2
ITU-T Rec. Q.617 (03/93) Logic procedures for incoming Signalling System No. 7 (ISUP)
ITU-T Rec. Q.621 (11/88) Logic procedures for outgoing Signalling System No. 4.
ITU-T Rec. Q.622 (11/88) Logic procedures for outgoing Signalling System No. 5
ITU-T Rec. Q.623 (11/88) Logic procedures for outgoing Signalling System No. 6
ITU-T Rec. Q.624 (03/93) Interworking of signalling systems – Logic procedures for outgoing Signalling System No. 7
ITU-T Rec. Q.625 (11/88) Logic procedures for outgoing Signalling System R1
ITU-T Rec. Q.626 (11/88) Logic procedures for outgoing Signalling System R2
ITU-T Rec. Q.627 (03/93) Interworking of signalling systems – Logic procedures for outgoing Signalling System No. 7 (ISUP)
ITU-T Rec. Q.634 (11/88) Logic procedures for interworking of Signalling System No. 4 to R2
ITU-T Rec. Q.642 (11/88) Logic procedures for interworking of Signalling System No. 5 to No. 6
ITU-T Rec. Q.643 (11/88) Logic procedures for interworking of Signalling System No. 5 to No. 7 (TUP)
ITU-T Rec. Q.644 (11/88) Logic procedures for interworking of Signalling System No. 5 to R1
ITU-T Rec. Q.645 (11/88) Logic procedures for interworking of Signalling System No. 5 to R2
ITU-T Rec. Q.646 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 5 to Signalling System No. 7 (ISUP)
ITU-T Rec. Q.652 (11/88) Logic procedures for interworking of Signalling System No. 6 to No. 5
ITU-T Rec. Q.653 (11/88) Logic procedures for interworking of Signalling System No. 6 to No. 7 (TUP).
ITU-T Rec. Q.654 (11/88) Logic procedures for interworking of Signalling System No. 6 to R1
ITU-T Rec. Q.655 (11/88) Logic procedures for interworking of Signalling System No. 6 to R2
ITU-T Rec. Q.656 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 6 to Signalling System No. 7 (ISUP)
ITU-T Rec. Q.662 (11/88) Logic procedures for interworking of Signalling System No. 7 (TUP) to No. 5
ITU-T Rec. Q.663 (11/88) Logic procedures for interworking of Signalling System No. 7 (TUP) to No. 6
ITU-T Rec. Q.664 (11/88) Logic procedures for interworking of Signalling System No. 7 (TUP) to No. 7 (TUP)
ITU-T Rec. Q.665 (11/88) Logic procedures for interworking of Signalling System No. 7 (TUP) to R1
ITU-T Rec. Q.666 (11/88) Logic procedures for interworking of Signalling System No. 7 (TUP) to R2
ITU-T Rec. Q.667 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 7 (TUP) to Signalling System No. 7 (ISUP)
ITU-T Rec. Q.671 (11/88) Logic procedures for interworking of Signalling System R1 to No. 5
ITU-T Rec. Q.672 (11/88) Logic procedures for interworking of Signalling System R1 to No. 6
ITU-T Rec. Q.673 (11/88) Logic procedures for interworking of Signalling System R1 to No. 7 (TUP)
ITU-T Rec. Q.674 (11/88) Logic procedures for interworking of Signalling System R1 to R2
ITU-T Rec. Q.675 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System R1 to Signalling System No. 7 (ISUP).
ITU-T Rec. Q.681 (11/88) Logic procedures for interworking of Signalling System R2 to No. 4
ITU-T Rec. Q.682 (11/88) Logic procedures for interworking of Signalling System R2 to No. 5
ITU-T Rec. Q.683 (11/88) Logic procedures for interworking of Signalling System R2 to No. 6
ITU-T Rec. Q.684 (11/88) Logic procedures for interworking of Signalling System R2 to No. 7 (TUP)
ITU-T Rec. Q.685 (11/88) Logic procedures for interworking of Signalling System R2 to R1
ITU-T Rec. Q.686 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System R2 to Signalling System No. 7 (ISUP)
ITU-T Rec. Q.690 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 5
ITU-T Rec. Q.691 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 5
ITU-T Rec. Q.692 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 7 (TUP)
ITU-T Rec. Q.694 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 7 (ISUP) to R1
ITU-T Rec. Q.695 (03/93) Interworking of signalling systems – Logic procedures for interworking of Signalling System No. 7 (ISUP) to R2
ITU-T Rec. Q.696 (06/97) Interworking between the Signalling System No. 7 ISDN User Part (ISUP) and Signalling Systems No. 5, R2 and Signalling System No. 7 TUP
ITU-T Rec. Q.698 (03/93) Interworking of Signalling System No. 7 ISUP, TUP and Signalling System No. 6 using arrow diagrams.
ITU-T Rec. Q.699 Addendum 1 (12/99) Interworking between ISDN access and non-ISDN access over ISDN user part of Signalling System No. 7 – Addendum 1: DSS1-SS7 interworking for call completion on no reply
ITU-T Rec. Q.699 (09/97) Interworking between ISDN access and non-ISDN access over ISDN User Part of Signalling System No. 7
ITU-T Rec. Q.699.1 (05/98) Interworking between ISDN access and non-ISDN access over ISDN user part of Signalling System No. 7: Support of VPN applications with PSS1 information flows
ITU-T Rec. Q.601-Q.695 Annex A (03/93) Lists and meanings of FITEs, BITEs and SPITEs – Representation of information contents of signals of the signalling systems
ITU-T Rec. Q.601-Q.695 Annex B (03/93) Narrative presentation of interworking
ITU-T Rec. Q.700 (03/93) Introduction to CCITT Signalling System No. 7
ITU-T Rec. Q.701 (03/93) Information technology – Open Systems Interconnection – Systems management overview
ITU-T Rec. Q.702 (11/88) Signalling data link
ITU-T Rec. Q.703 (07/96) Signalling link
ITU-T Rec. Q.704 (07/96) Signalling network functions and messages
ITU-T Rec. Q.705 (03/93) Signalling network structure
ITU-T Rec. Q.706 (03/93) Message transfer part signalling performance
ITU-T Rec. Q.707 (11/88) Testing and maintenance
ITU-T Rec. Q.708 (03/99) Assignment procedures for international signalling point codes.
ITU-T Rec. Q.709 (03/93) Hypothetical signalling reference connection
ITU-T Rec. Q.710 (11/88) Simplified MTP version for small systems
ITU-T Rec. Q.711 (07/96) Functional description of the Signalling Connection Control Part
ITU-T Rec. Q.712 (07/96) Definition and function of signalling connection control part messages
ITU-T Rec. Q.713 (07/96) Signalling Connection Control Part formats and codes
ITU-T Rec. Q.714 (07/96) Signalling connection control part procedures
ITU-T Rec. Q.715 (07/96) Signalling connection control part user guide
ITU-T Rec. Q.716 (03/93) Signalling connection control part (SCCP) performance
ITU-T Rec. Q.721 (11/88) Functional description of the Signalling System No. 7 Telephone User Part (TUP)
ITU-T Rec. Q.722 (11/88) General function of telephone messages and signals
ITU-T Rec. Q.723 (11/88) Formats and codes
ITU-T Rec. Q.724 (11/88) Signalling procedures
ITU-T Rec. Q.725 (03/93) Signalling performance in the telephone application
ITU-T Rec. Q.730 (12/99) ISDN user part supplementary services
ITU-T Rec. Q.731.1 (07/96) Stage 3 description for numbering identification supplementary services using Signalling System No. 7: Direct-Dialling-In (DDI).
ITU-T Rec. Q.731.3 (03/93) Stage 3 description for number identification supplementary services using Signalling System No. 7: Calling line identification presentation (CLIP)
ITU-T Rec. Q.731.7 (06/97) Stage 3 description for number identification supplementary services using Signalling System No. 7: Malicious call identification (MCID)
ITU-T Rec. Q.731.8 (02/92) Stage 3 description for number identification supplementary services using Signalling System No. 7; Section 8 – Sub-addressing (SUB)
ITU-T Rec. Q.732.2-5 (12/99) Stage 3 description for call offering supplementary services using signalling system No. 7: Call diversion services Q.732.2 – Call Forwarding Busy (CFB) Q.732.3 – Call Forwarding No Reply (CFNR) Q.732.4 – Call Forward…
ITU-T Rec. Q.732.2 – To be published
ITU-T Rec. Q.732.7 (07/96) Stage 3 description for call offering supplementary services using Signalling System No. 7: Explicit Call Transfer
ITU-T Rec. Q.733.1 (02/92) Stage 3 description for call completion supplementary services using No. 7 Signalling System – Call Waiting (CW)
ITU-T Rec. Q.733.2 (03/93) Stage 3 description for call completion supplementary services using SS No. 7
ITU-T Rec. Q.733.3 (06/97) Stage 3 description for call completion supplementary services using Signalling System No. 7: Completion of calls to busy subscriber (CCBS)
ITU-T Rec. Q.733.5 (12/99) Stage 3 description for call completion supplementary services using Signalling System No. 7: Completion of Calls on No Reply
ITU-T Rec. Q.734.1 (03/93) Covering Note – Stage 3 description for multiparty supplementary services using Signalling System no. 7.
ITU-T Rec. Q.734.1 (03/93) Stage 3 description for multiparty supplementary services using Signalling
System No. 7
ITU-T Rec. Q.734.2 (07/96) Stage 3 description for multiparty supplementary services using Signalling System No. 7: Three-party service
ITU-T Rec. Q.735.1 (03/93) Stage 3 description for community of interest supplementary services using SS No. 7
ITU-T Rec. Q.735.6 (07/96) Stage 3 description for community of interest supplementary services using Signalling System No. 7: Global Virtual Network Service (GVNS)
ITU-T Rec. Q.736.1 (10/95) Stage 3 description for charging supplementary services using Signalling System No. 7: Clause 1 – International Telecommunication Charge Card (ITCC)
ITU-T Rec. Q.736.3 (10/95) Stage 3 description for charging supplementary services using Signalling System No. 7: Reverse charging (REV)
ITU-T Rec. Q.737.1 (06/97) Stage 3 description for additional information transfer supplementary services using Signalling System No. 7: User-to-user signalling (UUS)
ITU-T Rec. Q.741 (11/88) Signalling System No. 7 – Data user part
ITU-T Rec. Q.750 (06/97) Overview of Signalling System No. 7 management
ITU-T Rec. Q.751.1 (10/95) Network element management information model for the Message Transfer Part (MTP)
ITU-T Rec. Q.751.2 (06/97) Network element management information model for the Signalling Connection Control Part
ITU-T Rec. Q.751.3 (09/97) Network element information model for MTP accounting.
ITU-T Rec. Q.751.4 (05/98) Network element information model for SCCP accounting and accounting verification
ITU-T Rec. Q.752 (06/97) Monitoring and measurements for Signalling System No. 7 networks
ITU-T Rec. Q.753 (06/97) Signalling System No. 7 management functions MRVT, SRVT and CVT and definition of the OMASE-user
ITU-T Rec. Q.754 (06/97) Signalling System No. 7 management Application Service Element (ASE) definitions
ITU-T Rec. Q.755 (03/93) Signalling System No. 7 protocol tests
ITU-T Rec. Q.755.1 (05/98) MTP Protocol Tester
ITU-T Rec. Q.755.2 (09/97) Transaction capabilities test responder
ITU-T Rec. Q.756 (06/97) Guidebook to Operations, Maintenance and Administration Part (OMAP)
ITU-T Rec. Q.761 (12/99) Signalling system No. 7 – ISDN user part functional description
ITU-T Rec. Q.762 Addendum 1 (06/00) To be published
ITU-T Rec. Q.762 (12/99) To be published
ITU-T Rec. Q.763 Addendum 1 (06/00) To be published
ITU-T Rec. Q.763 (09/97) Signalling System No. 7 – ISDN user part formats and codes
ITU-T Rec. Q.764 (12/99) To be published
ITU-T Rec. Q.764 Annex H Part 1 (02/95) Signalling System No. 7 – ISDN User Part signalling procedures.
ITU-T Rec. Q.764 Annex H Part 2 (02/95) Signalling System No. 7 – ISDN User Part signalling procedures
ITU-T Rec. Q.764 Annex H Part 3 (02/95) Signalling System No. 7 – ISDN User Part signalling procedures
ITU-T Rec. Q.764 Annex H Part 4 (02/95) Signalling System No. 7 – ISDN User Part signalling procedures
ITU-T Rec. Q.765 bis (12/99) Signalling System No. 7 – Application Transport Mechanism: Test Suite Structure and Test Purposes (TSS & TP)
ITU-T Rec. Q.765 (06/00) – To be published…
ITU-T Rec. Q.765.1 bis (12/99) to be published
ITU-T Rec. Q.765.1 (05/98) Signalling System No. 7 – Application transport mechanism – Support of VPN applications with PSS1 information flows
ITU-T Rec. Q.765.4 (06/00) to be published
ITU-T Rec. Q.765.5 (06/00) to be published
ITU-T Rec. Q.766 (03/93) Performance objectives in the integrated services digital network application
ITU-T Rec. Q.767 (02/91) Application of the ISDN user part of CCITT Signalling System No. 7 for international ISDN interconnections
ITU-T Rec. Q.768 (10/95) Signalling interface between an international switching centre (ISC) and an ISDN satellite subnetwork
ITU-T Rec. Q.769.1 (12/99) Signalling system No. 7 – ISDN user part enhancements for the support of number portability
ITU-T Rec. Q.771 (06/97) Functional description of transaction capabilities.
ITU-T Rec. Q.772 (06/97) Transaction capabilities information element definitions
ITU-T Rec. Q.773 (06/97) Transaction capabilities formats and encoding
ITU-T Rec. Q.774 (06/97) Transaction capabilities procedures
ITU-T Rec. Q.775 (06/97) Guidelines for using transaction capabilities
ITU-T Rec. Q.780 (10/95) Signalling System No. 7 test specification – General description
ITU-T Rec. Q.780 Supplement 1 (10/95) – Signalling System No. 7 testing and planning tools
ITU-T Rec. Q.781 (07/96) MTP level 2 test specification
ITU-T Rec. Q.782 (07/96) MTP level 3 test specification
ITU-T Rec. Q.783 (11/88) TUP test specification
ITU-T Rec. Q.784 (02/91) ISUP basic call test specification
ITU-T Rec. Q.784 Annex A (03/93) TTCN version of Recommendation Q.784
ITU-T Rec. Q.784.1 Corrigendum 1 (12/99) ISUP basic call test specification: Validation and compatibility for ISUP’92 and Q.767 protocols – Corrigendum 1
ITU-T Rec. Q.784.1 (07/96) ISUP basic call test specification: Validation and compatibility for ISUP’92 and Q.767 protocols
ITU-T Rec. Q.784.2 (06/97) ISUP basic call test specification: Abstract test suite for ISUP’92 basic call control procedures.
ITU-T Rec. Q.784.3 (12/99) to be published
ITU-T Rec. Q.785 (09/91) ISUP protocol test specification for supplementary services
ITU-T Rec. Q.785.2 (03/99) ISUP’97 supplementary services – Test suite structure and test purposes (TSS & TP)
ITU-T Rec. Q.786 (03/93) Signalling System No. 7 – SCCP test specification
ITU-T Rec. Q.787 (09/97) Transaction Capabilities (TC) test specification
ITU-T Rec. Q.788 (06/97) User-network-interface to user-network-interface compatibility test specifications for ISDN, non-ISDN and undetermined accesses interworking over international ISUP
ITU-T Rec. Q.811 (06/97) Lower layer protocol profiles for the Q3 and X interfaces
ITU-T Rec. Q.812 (06/97) Upper layer protocol profiles for the Q3 and X interfaces
ITU-T Rec. Q.812 Amendment 1 (03/99) Upper layer protocol profiles for the Q3 and X interfaces – Amendment 1: Additional X interface protocols for the service management layer (SML)
ITU-T Rec. Q.812 Amendment 3 (02/00) to be published
ITU-T Rec. Q.812 Appendix I (03/99) Guidance on using allomorphic management
ITU-T Rec. Q.813 (06/98) Security Transformations Application Service Element for Remote Operations Service Element (STASE-ROSE)
ITU-T Rec. Q.814 (02/00) to be published
ITU-T Rec. Q.815 (02/00) to be published.
ITU-T Rec. Q.821 (02/00) – To be published…
ITU-T Rec. Q.822 (04/94) Stage 1, Stage 2 and Stage 3 Description for the Q3 interface – Performance management
ITU-T Rec. Q.823 (07/96) Stage 2 and Stage 3 functional specifications for traffic management
ITU-T Rec. Q.823.1 (10/97) Management Conformance Statement Proformas
ITU-T Rec. Q.824.0 (10/95) Stages 2 and 3 description for the Q3 interface – Customer administration: Common information
ITU-T Rec. Q.824.1 (10/95) Stages 2 and 3 description for the Q3 interface – Customer administration – Integrated Services Digital Network (ISDN) basic and primary rate access
ITU-T Rec. Q.824.2 (10/95) Stages 2 and 3 description for the Q3 interface – Customer administration – Integrated Services Digital Network (ISDN) supplementary services
ITU-T Rec. Q.824.3 (10/95) Stages 2 and 3 description for the Q3 interface – Customer administration – Integrated Services Digital Network (ISDN), optional user facilities
ITU-T Rec. Q.824.4 (10/95) Stages 2 and 3 description for the Q3 interface – Customer administration – Integrated Services Digital Network (ISDN) – Teleservices
ITU-T Rec. Q.824.5 Corrigendum 1 – to be published
ITU-T Rec. Q.824.5 (10/97) Stage 2 and stage 3 description for the Q3 interface – Customer administration: Configuration management of V5 interface environments and associated customer profiles
ITU-T Rec. Q.824.6 (06/98) Stage 2 and stage 3 description for the Q3 interface – Customer administration: Broadband switch management
ITU-T Rec. Q.824.7 (02/00) to be published.
ITU-T Rec. Q.825 (06/98) Specification of TMN applications at the Q3 interface: Call detail recording
ITU-T Rec. Q.826 (02/00) to be published
ITU-T Rec. Q.831 (10/97) Fault and performance management of V5 interface environments and associated customer profiles
ITU-T Rec. Q.831.1 (02/00) to be published
ITU-T Rec. Q.832.1 (06/98) VB5.1 Management
ITU-T Rec. Q.832.2 (03/99) VB5.2 Management
ITU-T Rec. Q.835 (03/99) Line and line circuit test management of ISDN and analogue customer accesses
ITU-T Rec. Q.850 Addendum 1 (06/00) to be published
ITU-T Rec. Q.850 (05/98) Usage of cause and location in the Digital Subscriber Signalling System No. 1 and the Signalling System No. 7 ISDN User Part
ITU-T Rec. Q.860 (06/00) to be published
ITU-T Rec. Q.920 (03/93) Digital Subscriber Signalling System No. 1 (DSS1) – ISDN user-network interface data link layer – General aspects
ITU-T Rec. Q.920 Amendment 1 (06/00) to be published
ITU-T Rec. Q.921 bis (03/93) Abstract test suite for LAPD conformance testing
ITU-T Rec. Q.921 (09/97) ISDN user-network interface – Data link layer specification.
ITU-T Rec. Q.921 Amendment 1 (06/00) to be published
ITU-T Rec. Q.922 (02/92) ISDN data link layer specification for frame mode bearer services
ITU-T Rec. Q.923 (02/95) Specification of a synchronization and coordination function for the provision of the OSI connection-mode network service in an ISDN environment
ITU-T Rec. Q.930 (03/93) Digital Subscriber Signalling System No. 1 (DSS 1) – ISDN user-network interface layer 3 – General aspects
ITU-T Rec. Q.931 bis (02/95) PICS and abstract test suite for ISDN DSS 1 layer 3 … Circuit mode, basic call control conformance testing
ITU-T Rec. Q.931 (05/98) ISDN user-network interface layer 3 specification for basic call control
ITU-T Rec. Q.932 (05/98) Digital Subscriber Signalling System No. 1 – Generic procedures for the control of ISDN supplementary services
ITU-T Rec. Q.932 Amendment 1 (06/00) to be published
ITU-T Rec. Q.933 bis (10/95) PICS and abstract test suite for frame mode basic call control conformance testing of PVCs – Section 1: user and network sides of user-network interface
ITU-T Rec. Q.933 (10/95) Integrated services digital network (ISDN) digital subscriber signalling system No. 1 (DSS 1) – Signalling specifications for frame mode switched and permanent virtual connection control and status monitoring
ITU-T Rec. Q.939 (03/93) Digital Subscriber Signalling System No. 1 (DSS 1) – Typical DSS 1 service indicator codings for ISDN telecommunications services
ITU-T Rec. Q.940 (11/88) ISDN user-network interface protocol for management – General aspects.
ITU-T Rec. Q.941 (03/93) Digital Subscriber Signalling System No. 1 (DSS 1) – ISDN user-network interface protocol profile for management
ITU-T Rec. Q.950 (06/00) – To be published
ITU-T Rec. Q.951.1 (02/92) Stage 3 description for number identification supplementary services using DSS 1 – Direct-Dialling-In (DDI)
ITU-T Rec. Q.951.3 (03/93) Stage 3 description for number identification supplementary services using DSS 1: Calling line identification presentation (CLIP): Calling line identification restriction (CLIR): Connected line…
ITU-T Rec. Q.951.7 (06/97) Stage 3 description for number identification supplementary services using DSS 1: Malicious Call Identification (MCID)
ITU-T Rec. Q.952 (03/93) Stage 3 service description for call offering supplementary services using DSS 1: Diversion supplementary services
ITU-T Rec. Q.952.7 (06/97) Stage 3 description for call offering supplementary services using DSS 1: Explicit Call Transfer (ECT)
ITU-T Rec. Q.953.1 (02/92) Stage 3 description for call completion supplementary services using DSS 1: Call waiting
ITU-T Rec. Q.953.2 (03/93) Stage 3 description for call completion supplementary services using DSS 1: Clause 2 – Call hold
ITU-T Rec. Q.953.3 (06/97) Completion of Calls to Busy Subscribers (CCBS)
ITU-T Rec. Q.953.4 (10/95) Stage 3 description for call completion supplementary services using DSS 1: Clause 4 – Terminal Portability (TP)
ITU-T Rec. Q.953.5 (12/99) Call Completion on No Reply (CCNR).
ITU-T Rec. Q.954.1 Covering Note (03/93) Stage 3 description for multiparty supplementary services using DSS 1
ITU-T Rec. Q.954.1 (03/93) Stage 3 description for multiparty supplementary services using DSS 1: Conference calling; Three-party service
ITU-T Rec. Q.954.2 (10/95) Integrated services digital network (ISDN) – Stage 3 description for multiparty supplementary services using DSS 1: Three party (3PTY)
ITU-T Rec. Q.955.1 (02/92) Stage 3 description for community of interest supplementary services using DSS 1: Closed user group
ITU-T Rec. Q.955.3 (03/93) Stage 3 description for community of interest supplementary services using DSS 1: Multi-level precedence and preemption (MLPP)
ITU-T Rec. Q.956.2 (10/95) Integrated services digital network (ISDN) – Stage 3 service description for charging supplementary services using DSS 1: Clause 2 – Advice of charge (AOC)
ITU-T Rec. Q.956.3 (10/95) Integrated services digital network (ISDN) – Stage 3 description for charging supplementary services using DSS 1: Clause 3 – Reverse charging
ITU-T Rec. Q.957.1 (07/96) Stage 3 description for additional information transfer supplementary services using DSS 1: User-to-User Signalling (UUS)
ITU-T Rec. Q.1000 (11/88) Structure of the Q.1000-Series Recommendations for public land mobile networks
ITU-T Rec. Q.1001 (11/88) General aspects of public land mobile networks
ITU-T Rec. Q.1002 (11/88) Network functions
ITU-T Rec. Q.1003 (11/88) Location registration procedures
ITU-T Rec. Q.1004 (11/88) Location register restoration procedures.
ITU-T Rec. Q.1005 (11/88) Handover procedures
ITU-T Rec. Q.1031 (11/88) General signalling requirements on interworking between the ISDN or PSTN and the PLMN
ITU-T Rec. Q.1032 (11/88) Signalling requirements relating to routing of calls to mobile subscribers
ITU-T Rec. Q.1061 (11/88) General aspects and principles relating to digital PLMN access signalling reference points
ITU-T Rec. Q.1062 (11/88) Digital PLMN access signalling reference configurations
ITU-T Rec. Q.1063 (11/88) Digital PLMN channel structures and access capabilities at the radio interface (Um reference point)
ITU-T Rec. Q.1100 (03/93) Interworking with Standard A INMARSAT system – Structure of the Recommendations on the INMARSAT mobile satellite systems
ITU-T Rec. Q.1101 (11/88) General requirements for the interworking of the terrestrial telephone network and INMARSAT Standard A system
ITU-T Rec. Q.1102 (11/88) Interworking between Signalling System R2 and INMARSAT Standard A system
ITU-T Rec. Q.1103 (11/88) Interworking between Signalling System No. 5 and INMARSAT Standard A system
ITU-T Rec. Q.1111 (03/93) Interfaces between the INMARSAT Standard B system and the international public switched telephone network/ISDN
ITU-T Rec. Q.1112 (03/93) Procedures for interworking between INMARSAT Standard-B system and the international public switched telephone network/ISDN
ITU-T Rec. Q.1151 (03/93) Interfaces for interworking between the INMARSAT aeronautical mobile-satellite system and the international public switched telephone network/ISDN.
ITU-T Rec. Q.1152 (03/93) Procedures for interworking between INMARSAT aeronautical mobile satellite system and the international public switched telephone network/ISDN
ITU-T Rec. Q.1200 (09/97) General series Intelligent Network Recommendation structure
ITU-T Rec. I.312/Q.1201 (10/92) Principles of intelligent network architecture
ITU-T Rec. I.328/Q.1202 (09/97) Intelligent Network – Service plane architecture
ITU-T Rec. I.329/Q.1203 (09/97) Intelligent Network – Global functional plane architecture
ITU-T Rec. Q.1204 (03/93) Intelligent network distributed functional plane architecture
ITU-T Rec. Q.1205 (03/93) Intelligent network physical plane architecture
ITU-T Rec. Q.1208 (09/97) General aspects of the Intelligent Network Application protocol
ITU-T Rec. Q.1210 (10/95) Q.1210-Series Intelligent Network Recommendation structure Q.1210-Series Intelligent Network Recommendation structure
ITU-T Rec. Q.1211 (03/93) Introduction to intelligent network capability set 1
ITU-T Rec. Q.1213 (10/95) Global functional plane for intelligent network CS-1
ITU-T Rec. Q.1214 (10/95) Distributed functional plane for intelligent network CS-1
ITU-T Rec. Q.1215 (10/95) Physical plane for intelligent network CS-1
ITU-T Rec. Q.1218 Addendum 1 (09/97) Definition for two new contexts in the SDF data model
ITU-T Rec. Q.1218 (10/95) Interface recommendation for intelligent network CS-1.
ITU-T Rec. Q.1219 (04/94) Intelligent network user’s guide for Capability Set 1
ITU-T Rec. Q.1219 Supplement 1 (09/97) Intelligent Network user’s guide: Supplement for IN CS-1; Supplement 1
ITU-T Rec. Q.1220 (09/97) Q.1220-series Intelligent Network Capability Set 2 Recommendation structure
ITU-T Rec. Q.1221 (09/97) Introduction to Intelligent Network Capability Set 2
ITU-T Rec. Q.1222 (09/97) Service plane for Intelligent Network Capability Set 2
ITU-T Rec. Q.1223 (09/97) Global functional plane for Intelligent Network Capability Set 2
ITU-T Rec. Q.1224 (09/97) Distributed functional plane for intelligent network Capability Set 2: Part  1
ITU-T Rec. Q.1224 (09/97) Distributed functional plane for intelligent network Capability Set 2: Part 2
ITU-T Rec. Q.1224 (09/97) Distributed functional plane for intelligent network Capability Set 2: Part 3
ITU-T Rec. Q.1225 (09/97) Physical plane for Intelligent Network Capability Set 2
ITU-T Rec. Q.1228 Fascicle 1/5 (09/97) Interface Recommendation for intelligent network Capability Set 2
ITU-T Rec. Q.1228 Fascicle 2/5 (09/97) Interface Recommendation for intelligent network Capability Set 2
ITU-T Rec. Q.1228 Fascicle 3/5 (09/97) Interface Recommendation for intelligent network Capability Set 2
ITU-T Rec. Q.1228 Fascicle 4/5 (09/97) Interface Recommendation for intelligent network Capability Set 2
ITU-T Rec. Q.1228 Fascicle 5/5 (09/97) Interface Recommendation for intelligent network Capability Set 2.
ITU-T Rec. Q.1229 (03/99) Intelligent Network user’s guide for Capability Set 2
ITU-T Rec. Q.1236 (12/99) Intelligent Network Capability Set 3 – Management Information Model
Requirements and Methodology
ITU-T Rec. Q.1237 (06/00) to be published
ITU-T Rec. Q.1238.1 (06/00) to be published
ITU-T Rec. Q.1238.2 (06/00) – To be published
ITU-T Rec. Q.1238.3 (06/00) to be published
ITU-T Rec. Q.1238.4 (06/00) to be published
ITU-T Rec. Q.1238.5 (06/00) to be published
ITU-T Rec. Q.1238.6 (06/00) to be published
ITU-T Rec. Q.1238.7 (06/00) to be published
ITU-T Rec. Q.1290 (05/98) Glossary of terms used in the definition of intelligent networks
ITU-T Rec. Q.1300 (10/95) Telecommunication applications for switches and computers (TASC) – General overview
ITU-T Rec. Q.1301 (10/95) Telecommunication applications for switches and computers (TASC) – TASC Architecture
ITU-T Rec. Q.1302 (10/95) Telecommunication applications for switches and computers (TASC) – TASC functional services.
ITU-T Rec. Q.1303 (10/95) Telecommunication applications for switches and computers (TASC) – TASC Management : Architecture, methodology and requirements
ITU-T Rec. Q.1400 Addendum 1 (02/95) Architecture framework for the development of signalling and OAM protocols using OSI concepts
ITU-T Rec. Q.1400 (03/93) Architecture framework for the development of signalling and OA&M protocols using OSI concepts
ITU-T Rec. Q.1521 (06/00) to be published
ITU-T Rec. Q.1531 (06/00)  to be published
ITU-T Rec. Q.1541 (05/98) UPT stage 2 for Service Set 1 on IN CS-1 – Procedures for universal personal telecommunication: Functional modelling and information flows
ITU-T Rec. Q.1542 (06/00) to be published
ITU-T Rec. Q.1551 (06/97) Application of Intelligent Network Application Protocols (INAP) CS-1 for UPT Service Set 1
ITU-T Rec. Q.1600 (09/97) Signalling system No. 7 – Interaction between ISUP and INAP
ITU-T Rec. Q.1601 (12/99) to be published
ITU-T Rec. Q.1701 (03/99) Framework for IMT-2000 networks
ITU-T Rec. Q.1711 (03/99) Network functional model for IMT-2000
ITU-T Rec. Q.1721 (06/00) to be published
ITU-T Rec. Q.1731 (06/00) to be published.
ITU-T Rec. Q.1901 (06/00) to be published
ITU-T Rec. Q.2010 (02/95) Broadband integrated services digital network overview – Signalling capability set 1, release 1
ITU-T Rec. Q.2100 (07/94) B-ISDN signalling ATM adaptation layer (SAAL) overview description
ITU-T Rec. Q.2110 (07/94) B-ISDN ATM adaptation layer – Service specific connection oriented protocol (SSCOP)
ITU-T Rec. Q.2111 (12/99)  to be published
ITU-T Rec. Q.2119 (07/96) B-ISDN ATM adaptation layer – Convergence function for SSCOP above the frame relay core service
ITU-T Rec. Q.2120 (02/95) B-ISDN meta-signalling protocol
ITU-T Rec. Q.2130 (07/94) B-ISDN signalling ATM adaptation layer – Service specific coordination function for support of signalling at the user-network interface (SSCF at UNI)
ITU-T Rec. Q.2140 (02/95) B-ISDN ATM adaptation layer – Service specific coordination function for signalling at the network node interface (SSCF AT NNI)
ITU-T Rec. Q.2144 (10/95) B-ISDN signalling ATM adaptation layer (SAAL) – Layer management for the SAAL at the network node interface (NNI)
ITU-T Rec. Q.2150.1 (12/99) AAL type 2 signalling transport converter on broadband MTP
ITU-T Rec. Q.2150.2 (12/99) AAL type 2 signalling transport converter on SSCOP
ITU-T Rec. Q.2210 (07/96) Message transfer part level 3 functions and messages using the services of ITU-T Recommendation Q.2140.
ITU-T Rec. Q.2610 (12/99) Usage of cause and location in B-ISDN user part and DSS 2
ITU-T Rec. Q.2630.1 (12/99) to be published
ITU-T Rec. Q.2650 (12/99) to be published
ITU-T Rec. Q.2660 (12/99) Interworking between signalling system No. 7 broadband ISDN user part (B-ISUP) and narrow-band ISDN user part (N-ISUP)
ITU-T Rec. Q.2722.1 (07/96) B-ISDN User Part – Network Node Interface specification for point-to-multipoint call/connection control
ITU-T Rec. Q.2722.1 Amendment 1 (06/00) – To be published
ITU-T Rec. Q.2724.1 (07/96) B-ISDN User Part – Look-ahead without state change for the Network Node Interface (NNI)
ITU-T Rec. Q.2726.2 (07/96) B-ISDN User Part – Call priority
ITU-T Rec. Q.2726.3 (07/96) B-ISDN User Part – Network generated session identifier
ITU-T Rec. Q.2726.4 (06/00) – To be published
ITU-T Rec. Q.2730 (12/99) Signalling system No. 7 B-ISDN user part (B-ISUP) – Supplementary services
ITU-T Rec. Q.2735.1 (06/97) Stage 3 description for community of interest supplementary services for B-ISDN using SS No.7: Closed User Group (CUG)
ITU-T Rec. Q.2751.1 (09/97) Extension of Q.751.1 for SAAL signalling links
ITU-T Rec. Q.2761 (12/99) to be published.
ITU-T Rec. Q.2762 (02/95) Broadband integrated services digital network (B-ISDN) – General functions of messages and signals of the B-ISDN user part (B-ISUP) of Signalling System No. 7
ITU-T Rec. Q.2763 (02/95) Broadband Integrated Services Digital Network (B-ISDN) – Signalling System No. 7 B-ISDN User Part (B-ISUP) – Formats and codes
ITU-T Rec. Q.2764  (12/99) to be published
ITU-T Rec. Q.2765  (12/99)  to be published
ITU-T Rec. Q.2766.1 (05/98) Switched virtual path capability
ITU-T Rec. Q.2766.1 Amendment 1 (06/00) To be published
ITU-T Rec. Q.2767.1 (06/00) – To be published
ITU-T Rec. Q.2769.1 (06/00) – To be published
ITU-T Rec. Q.2931 (02/95) Broadband Integrated Services Digital Network (B-ISDN) – Digital Subscriber Signalling System No. 2 (DSS 2) – User-Network Interface (UNI) – Layer 3 specification for basic call/connection control
ITU-T Rec. Q.2931 Amendment 1 (06/97) Digital Subscriber Signalling System No. 2 – User-Network Interface (UNI) layer 3 specification for basic call/connection control
ITU-T Rec. Q.2931 Amendment 2 Corrigendum 1 (06/00) – To be published
ITU-T Rec. Q.2931 Amendment 2 (03/99) Digital subscriber signalling system No. 2 – User-network interface (UNI) layer 3 specification for basic call/connection control – Amendment 2
ITU-T Rec. Q.2931 Amendment 3 (03/99) User-network interface (UNI) layer 3 specification for basic call/connection control – Amendment 3.
ITU-T Rec. Q.2931 Amendment 4 (12/99) to be published
ITU-T Rec. Q.2932.1 (07/96) Digital Subscriber Signalling System No. 2 – Generic functional protocol: Core functions
ITU-T Rec. Q.2933 (07/96) Digital Subscriber Signalling System No. 2 (DSS 2) – Signalling specification for Frame Relay service
ITU-T Rec. Q.2934 (05/98) Digital Subscriber Signalling System No. 2 – Switched virtual path capability
ITU-T Rec. Q.2939.1 (09/97) Digital Subscriber Signalling System No. 2 – Application of DSS 2 service-related information elements by equipment supporting B-ISDN services
ITU-T Rec. Q.2941.1 (09/97) Digital Subscriber Signalling System No. 2 – Generic identifier transport
ITU-T Rec. Q.2941.2 (12/99) to be published
ITU-T Rec. Q.2941.3 (06/00) – To be published
ITU-T Rec. Q.2951 Corrigendum 1 (05/98) Stage 3 description for number identification supplementary services using B-ISDN Digital Subscriber Signalling System No.2 (DSS 2) – Basic call – Corrigendum 1
ITU-T Rec. Q.2951 (02/95) Stage 3 description for number identification supplementary services using B-ISDN Digital Subscriber Signalling System No. 2 (DSS 2) – Basic call
ITU-T Rec. Q.2951.9 (12/99) to be published
ITU-T Rec. Q.2955.1 (06/97) Stage 3 description for community of interest supplementary services using B-ISDN Digital Subscriber Signalling System No. 2 (DSS 2): Closed User Group (CUG)
ITU-T Rec. Q.2957.1 (02/95) User-to-user signalling (UUS).
ITU-T Rec. Q.2957.1 Amendment 1 (12/99) To be published
ITU-T Rec. Q.2959 (07/96) Digital subscriber signalling system No. 2 – Call priority
ITU-T Rec. Q.2961.2 Corrigendum 1 (03/99) Digital subscriber signalling system No. 2 – Additional traffic parameters: Support of ATM transfer capability in the broadband bearer capability information element
ITU-T Rec. Q.2961 (10/95) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling system No. 2 (DSS 2) – Additional traffic parameters
ITU-T Rec. Q.2961.1 (10/95) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling system No. 2 (DSS 2) – Additional traffic parameters
ITU-T Rec. Q.2961.2 (06/97) Digital subscriber signalling system No. 2 – Additional traffic parameters: Support of ATM transfer capability in the broadband bearer capability information element
ITU-T Rec. Q.2961.3 (09/97) Digital Subscriber Signalling System No. 2 – Additional traffic parameters: Signalling capabilities to support traffic parameters for the available bit rate (ABR) ATM transfer capability
ITU-T Rec. Q.2961.4 (09/97) Digital Subscriber Signalling System No. 2 – Additional traffic parameters: Signalling capabilities to support traffic parameters for the ATM Block Transfer (ABT) ATM transfer capability
ITU-T Rec. Q.2961.5 (03/99) Digital subscriber signalling system No. 2 – Additional traffic parameters: Additional traffic parameters for cell delay variation tolerance indication
ITU-T Rec. Q.2961.6 (05/98) Digital Subscriber Signalling System No. 2 – Additional traffic parameters: Additional signalling procedures for the support of the SBR2 and SBR3 ATM transfer capabilities
ITU-T Rec. Q.2962 (05/98) Digital Subscriber Signalling System No. 2 – Connection characteristics negotiation during call/connection establishment phase
ITU-T Rec. Q.2963.1 – to be published.
ITU-T Rec. Q.2963.2 (09/97) Digital Subscriber Signalling Systems No. 2 – Connection modification: Modification procedures for sustainable cell rate parameters
ITU-T Rec. Q.2963.3 (05/98) Digital Subscriber Signalling System No. 2 – Connection modification: ATM traffic descriptor modification with negotiation by the connection owner
ITU-T Rec. Q.2964.1 (07/96) Digital Subscriber Signalling System No. 2: Basic Look-Ahead
ITU-T Rec. Q.2965.1 (03/99) Digital subscriber signalling system No. 2 – Support of Quality of Service classes
ITU-T Rec. Q.2965.1 Amendment 1 (06/00) – To be published
ITU-T Rec. Q.2965.2 (12/99) to be published
ITU-T Rec. Q.2971 Quarter (12/99) to be published
ITU-T Rec. Q.2971 Quinquies (12/99) to be published
ITU-T Rec. Q.2971 Sexies (12/99) to be published
ITU-T Rec. Q.2971 Ter (12/99) to be published
ITU-T Rec. Q.2971 Corrigendum 1 (12/99) Digital subscriber signalling system No. 2 (DSS2) – User-Network Interface Layer 3 specification for point-to-multipoint Call/Connection Control
ITU-T Rec. Q.2971 (10/95) Broadband integrated services digital network B-ISDN – DSS 2 – Digital subscriber signalling system N.o 2 – User-network interface layer 3 specification for point-to-multipoint call/connection control
ITU-T Rec. Q.2971 (10/95) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling system No. 2 (DSS 2) – User-network interface layer 3 specification for point-to-multipoint call/connection control.
ITU-T Rec. Q.2971 (10/95) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling system No. 2 (DSS 2) – User-network interface layer 3 specification for point-to-multipoint call/connection control
ITU-T Rec. Q.2971 (10/95) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling system No. 2 (DSS 2) – User-network interface layer 3 specification for point-to-multipoint call/connection control
ITU-T Rec. Q.2971 (10/95) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling system No. 2 (DSS 2) – User-network interface layer 3 specification for point-to-multipoint call/connection control
ITU-T Rec. Q.2981 (12/99) to be published
ITU-T Rec. Q.2982 (12/99) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling No. 2 (DSS2) – Q.2931-based separated call control protocol
ITU-T Rec. Q.2983 (12/99) Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling No. 2 (DSS2) – Bearer control protocol
ITU-T Rec. Q.2984 (12/99) to be published
ITU-T Rec. Q.2991.1 (12/99) to be published
ITU-T Rec. Q.2991.2 (12/99) to be published
ITU-T Rec. Q Supplement 3 (05/98) Number portability – Scope and capability set 1 architecture
ITU-T Rec. Q Supplement 4 (05/98) Number portability – Capability set 1 requirements for service provider portability (All call query and Onward routing)
ITU-T Rec. Q Supplement 5 (03/99) Number portability – Capability set 2 requirements for service provider portability (Query on release and Dropback).
ITU-T Rec. Q. Supplement 6 (03/99) Technical Report TRQ.2000: Roadmap for the TRQ.2xxx-series technical reports
ITU-T Rec. Q. Supplement 7 (03/99) Technical Report TRQ.2001: General aspects for the development of unified signalling requirements
 
ITU-T Rec. Q. Supplement 8 (03/99) Technical Report TRQ.2400: Transport control signalling requirements – Signalling requirements for AAL type 2 link control capability set 1

For access, recommendations Click Here

Leave a Reply

Your email address will not be published. Required fields are marked *